How To Flash Your Phone Using CFW Using JAF and Phoenix

First of all SALUTE to all those who made this sort of stuff possible..!!! AND Khantastic,mobileping for sharing

Disclaimer:
Do all the flashing at your own risk, you may damage your phone if done wrongly!

This Guide has been created using Nokia 5800, but can be followed to flash any firmware for any device. (doesn't mean you can flash E72 fw in X6..etc)

Now back to Topic

First you have to download your firmware files using navifirm then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\"

RM-*** must be renamed to your RM version

Then you have to download the hacked or customized firmware files you want to flash into your device...

Rename those downloaded files to the one your actual firmware files are of.. e.g. if your genuine file name is abc.fpsx and asdf.V03 and the hacked or customized firmware files have name aaa.fpsx and bbb.V22 then rename those files to abc.fpsx and asdf.V03

Copy those renamed files to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\"
and overwrite.

Download & launch JAF v.1.98.62.exe

Set options like in picture below:
that is
uncheck all boxes on bb5 tab except "manual flash", "dead usb" and "normal mode"....

then check "use ini" and wait for pop up box to show up...
And select your phone:

if your device is not listed, simply follow the steps mentioned at the end of the thread

JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\" (on picture is RM-504 but it have to be RM-***)

or from

C:\Program Files\Nokia\Phoenix\Products\RM-555\ (mostly this)

*** corresponds to your RM version

JAF will looks like

Now TURN OFF your phone !! and then click FLASH button after that press power button (don't hold it) on your phone and JAF will start flashing.

Now wait for flash to finish and boot up your device, if it doesn't then, turn your device on yourself.. and follow all the steps (if any) mentioned in respective firmware thread to be followed after flash..

An alternate Way of using jaf (video guide)

Download JAF

DOWNLOAD JAF.RAR

If your device is not Listed

DOWNLOAD [INI] FILE HERE 

1. unrar the file "ini.rar"
2. open the folder "ini'
3. right click on the folder "ODEON"
4. scroll down and left click "copy"
5. Now go to "C:\Program Files".
6. right click anywhere in the "C:\Program Files" folder
7. scroll down to "paste" and left click on "paste".
8. select "YES" overwrite all files if it asks you to do that

Note: If you have any doubt/query regarding custom firmwares or flashing method.. post them here
and never use phoenix to flash a custom firmware but if you are intrested on knwing how to then visit here